This International Standard specifies requirements for rubber and plastics hose and hose assemblies for usewith compressed, liquefied and dissolved gases up to a maximum working pressure of 45 MPa (450 bar),within the ambient temperature range of −20 °C to +60 °C.This International Standard applies to hose assemblies used to connect industrial gas cylinders to manifoldsor bundles prior to any pressure reduction stage.This International Standard does not cover rubber or thermoplastic hoses for welding, cutting and alliedprocesses (see ISO 3821 and ISO 12170).This International Standard does not apply to refrigerated liquefied gases or to liquefied petroleum gases(LPG).
ÖNORM EN ISO 14113
2013 12 15
Gas welding equipment - Rubber and plastics hose and hose assemblies for use with industrial gases u...
Norm
ÖNORM EN ISO 14113
2009 02 01
Gas welding equipment - Rubber and plastics hose and hose assemblies for use with industrial gases u...
Norm
↖
ÖNORM EN ISO 14113
1997 10 01
Gas welding equipment - Rubber and plastic hoses assembled for compressed or liquefied gases up to a...
Norm
Norm
ISO 1402:2009
Issue date : 2009 10 09
Rubber and plastics hoses and hose assemblies — Hydrostatic testing
Norm
ISO 1817:2011
Issue date : 2011 09 13
Rubber, vulcanized or thermoplastic — Determination of the effect of liquids
Norm
ISO 4671:2007
Issue date : 2007 12 11
Rubber and plastics hoses and hose assemblies — Methods of measurement of the dimensions of hoses and the lengths of hose assemblies
Norm
ISO 8031:2009
Issue date : 2009 10 05
Rubber and plastics hoses and hose assemblies — Determination of electrical resistance and conductivity
Norm
ISO 9539:2010
Issue date : 2010 01 06
Gas welding equipment — Materials for equipment used in gas welding, cutting and allied processes
Norm
ISO 11114-3:2010
Issue date : 2010 12 01
Gas cylinders — Compatibility of cylinder and valve materials with gas contents — Part 3: Autogenous ignition test for non-metallic materials in oxygen atmosphere
Norm
ISO 15296:2004
Issue date : 2004 10 12
Gas welding equipment — Vocabulary — Terms used for gas welding equipment
Norm
ISO 23529:2010
Issue date : 2010 10 22
Rubber — General procedures for preparing and conditioning test pieces for physical test methods
Norm
ISO 105-A02:1993
Issue date : 1993 08 26
Textiles — Tests for colour fastness — Part A02: Grey scale for assessing change in colour
Norm
ISO 1307:2006
Issue date : 2006 09 01
Rubber and plastics hoses — Hose sizes, minimum and maximum inside diameters, and tolerances on cut-to-length hoses
Norm
ISO 1402:2021
Issue date : 2021 04 30
Rubber and plastics hoses and hose assemblies — Hydrostatic testing
Norm
ISO 1746:1998
Issue date : 1998 05 07
Rubber or plastics hoses and tubing — Bending tests
Norm
ISO 1817:2015
Issue date : 2015 02 11
Rubber, vulcanized or thermoplastic — Determination of the effect of liquids
Norm
ISO 4080:1991
Issue date : 1991 11 14
Rubber and plastics hoses and hose assemblies — Determination of permeability to gas
Norm
ISO 4671:2007
Issue date : 2007 12 11
Rubber and plastics hoses and hose assemblies — Methods of measurement of the dimensions of hoses and the lengths of hose assemblies
Norm
ISO 4672:1997
Issue date : 1997 02 27
Rubber and plastics hoses — Sub-ambient temperature flexibility tests
Norm
ISO 7326:2006
Issue date : 2006 10 06
Rubber and plastics hoses — Assessment of ozone resistance under static conditions
Norm
ISO 8031:2020
Issue date : 2020 06 29
Rubber and plastics hoses and hose assemblies — Determination of electrical resistance and conductivity
Norm
ISO 8033:2006
Issue date : 2006 07 06
Rubber and plastics hoses — Determination of adhesion between components
Norm
ISO 9539:2010
Issue date : 2010 01 06
Gas welding equipment — Materials for equipment used in gas welding, cutting and allied processes
Norm
ISO 11114-3:2010
Issue date : 2010 12 01
Gas cylinders — Compatibility of cylinder and valve materials with gas contents — Part 3: Autogenous ignition test for non-metallic materials in oxygen atmosphere
Norm
ISO 11758:1995
Issue date : 1995 08 10
Rubber and plastics hoses — Exposure to a xenon arc lamp — Determination of changes in colour and appearance
Norm
ISO 15296:2017
Issue date : 2017 10 11
Gas welding equipment — Vocabulary
Norm
ISO 23529:2016
Issue date : 2016 10 27
Rubber — General procedures for preparing and conditioning test pieces for physical test methods
Norm
ÖNORM EN ISO 14113
Issue date : 2013 12 15
Gas welding equipment - Rubber and plastics hose and hose assemblies for use with industrial gases up to 450 bar (45 MPa) (ISO 14113:2013)
Norm
ISO 14113:2007
Issue date : 2007 10 23
Gas welding equipment — Rubber and plastics hose and hose assemblies for use with industrial gases up to 450 bar (45 MPa)
